A control device that can be applied to equipment such as desktop robots, articulated robots, inline systems and etc. to select the method of dispensing and to control the dispensing volume.
Specification
| Dimension | 240 x 118 x 210 mm |
| Weight | 3.2 kg |
| Power | AC 220V 50/60 Hz (1 Phase) |
| Power Consumption | 200VA Max |
| Display | 4.5 in TFT LCD |
| Operating Method | Touch panel, Button, Regulator |
| Operating Mode | Time, Steady, Anti, Ratio |
| Memory | 15CH |
| Air Pressure | 0.5 MPa |
| Inlet Port | One Touch Fitting PC (Ø6, Max 0.7 MPa) |
| Outlet Port | Auto Jointer (PH-H4) |
| Flow Sensor & External control | OK |
| Input Signal | Contact Input or NPN Open Collector |
| End Signal | NPN Open Collector |
| Temperature & Humidity | Below 0 ~ 40℃ / 80[%]RH (A place where no steam is generated) |
| STD Component | Motor Cable, I/O cable, Power cable, Terminal block |
